CIRC-IT – Single Probe Weld Scanner (Jireh)

Small diameter, low profile scanning made possible with the CIRC-IT – Single Probe Weld Scanner. Designed to provide encoded probe positioning circumferentially around piping and tubing ranging in size from 21.4 – 114.3 mm (0.84 – 4.5 in), this manually operated scanner can operate in an 11 mm (0.433 in) radial clearance envelope due to the ultra low profile design.

Andere suggesties…

GENERAL

  • Pipe Diameter Range: 21.4 mm – 114.3 mm (0.84 in – 4.5 in)1
  • Minimum Radial Clearance: 11 mm (0.433 in)2
  • Encoder: RS422 line driver, compatible with all standard encoder inputs
  • Encoder Resolution: 31.30 counts/mm (795.0 counts/inch)
  • Probe Holding Capacity: 1 phased array wedges
  • Encoder Cable Length: 3 m (9.8 ft)3
  • Inspection Surface: Ferrous and non-ferrous

RADIAL CLEARANCE

  • Radial Scanner Clearance: 11 mm (0.43 in)

SIZE & WEIGHT

  • Scanner Height: 11 mm (0.43 in)
  • Scanner Width: 53.5 mm (2.1 in)
  • Scanner Depth: 105.6 mm (4.2 in)4
  • Scanner Weight: 0.09 kg (0.2 lb)
  • Shipping weight: 3.1 kg (6.8 lb)5

ENVIRONMENTAL SPECIFICATIONS

  • Operating Environment: -20°C (-4°F) to 50°C (122°F)
  • Environmental Sealing: Dust-tight, watertight (not submersible)