Reference Block Type 1 according to EN ISO 9934-2 (MTU No 3)

Het ​​MTU-testblok nummer 3 volgens EN-ISO 9934-2; ook wel bekend als referentieblok type 1 wordt gebruikt om de concentratie van uw magnetische testinkt of MPI poedersuspensies te testen. Zodat u zeker bent van een optimale foutindicatie tijdens het uitvoeren van magnetische particle inspectie. De MTU schijf wordt gebruikt om de prestaties en gevoeligheid van magnetische deeltjesmateriaal te controleren en om de degradatie van het testinkt en/of contaminatie van het bad te bepalen.

Het MTU blok No. 3 wordt tijdens de productie ervan gemagnetiseerd met een stroom van 24 A / cm. Het residuele magnetische veld is voldoende voor normaal gebruik, wat betekent dat het referentie aantal zorgvuldige reiniging tussen de tests vereist.

Het blok wordt geleverd inclusief referentiefoto en een certificate of conformance van de fabrikant.

Artikelnummer: 134.002.002 (Helling), 026T042 (Magnaflux) Categorieën: , Tags: ,

Beschrijving

Verification of  sensitivity of indications of magnetic powder suspensions.

The reference block is used for checking and supervision of the indication sensitivity of magnetic particle crack detection agents.
It is prepared in accordance with the EN ISO 9934-2.

The reference block consists of  a disc with a bore hole and two types of natural cracks:

  • rough grinding cracks
  • fine stress corrosion cracks

The reference block was permantently magnetised by a central conductor through the bore hole .

The evaluation of magnetic powder suspensions is performed by visual or metrological comparison of the indications with a reference picture  which was produced under same testing conditions.

> Download Magnaflux product flyer Magnetic Particle Inspection two sided Reference Block Type 1 (MTU No 3)

> Download Magnaflux product flyer Magnetic Particle Inspection two sided Reference Block Type 1 (MTU No 3)

Andere suggesties…