Fillet Welding Lashoekmeter voor Convex en Concave Metrisch

Prijs 25,00

Fillet Welding Gage for Convex and Concave (metric)

Artikelnummer: WG-221

Let op: deze lashoekmeter is desgewenst los te bestellen (minimaal orderbedrag van toepassing), maar deze zit ook in onze lasinspectiekits

3 op voorraad

Artikelnummer: WG-221 Categorieën: ,

Fillet Welding Gage for Convex and Concave (metric)
If a weld is convex, you only need to use the end of the gage shown under convex. Be sure to measure both legs, Use the other for concave
The welds are sized by the leg dimensions. The convex side measures the leg. The concave gage measure the throat. Both welds below are 1/4″ fillet welds. One is convex, one is concave. The effective throats are the same
The lines shown on the gage are a reference for the leg dimension whether the weld be convex or concave. The upper edge of the gage is the only part used for measuring the leg size of a convex weld. The lower edge is LARGER than the actual weld size for that gage. The vertical line can be used as a visual reference OR turn the gage around.

Place double arc edge flush to the base material so tip touches vertical member. if the tip bwtween the double arc touches the centre of the weld, the weld is the profile desired and is the size indicated
Weight: 155g

Extra informatie

Gewicht 0.25 kg