Advies nodig? Neem direct contact op!

CIRC-IT – Single Probe Weld Scanner (Jireh)

Small diameter, low profile scanning made possible with the CIRC-IT – Single Probe Weld Scanner. Designed to provide encoded probe positioning circumferentially around piping and tubing ranging in size from 21.4 – 114.3 mm (0.84 – 4.5 in), this manually operated scanner can operate in an 11 mm (0.433 in) radial clearance envelope due to the ultra low profile design.

Small diameter, low profile scanning made possible with the CIRC-IT – Single Probe Weld Scanner. Designed to provide encoded probe positioning circumferentially around piping and tubing ranging in size from 21.4 – 114.3 mm (0.84 – 4.5 in), this manually operated scanner can operate in an 11 mm (0.433 in) radial clearance envelope due to the ultra low profile design.

GENERAL

  • Pipe Diameter Range: 21.4 mm – 114.3 mm (0.84 in – 4.5 in)1
  • Minimum Radial Clearance: 11 mm (0.433 in)2
  • Encoder: RS422 line driver, compatible with all standard encoder inputs
  • Encoder Resolution: 31.30 counts/mm (795.0 counts/inch)
  • Probe Holding Capacity: 1 phased array wedges
  • Encoder Cable Length: 3 m (9.8 ft)3
  • Inspection Surface: Ferrous and non-ferrous

RADIAL CLEARANCE

  • Radial Scanner Clearance: 11 mm (0.43 in)

SIZE & WEIGHT

  • Scanner Height: 11 mm (0.43 in)
  • Scanner Width: 53.5 mm (2.1 in)
  • Scanner Depth: 105.6 mm (4.2 in)4
  • Scanner Weight: 0.09 kg (0.2 lb)
  • Shipping weight: 3.1 kg (6.8 lb)5

ENVIRONMENTAL SPECIFICATIONS

  • Operating Environment: -20°C (-4°F) to 50°C (122°F)
  • Environmental Sealing: Dust-tight, watertight (not submersible)

Extra informatie

Gerelateerde Producten
Sorry, no content found.